About Autotac

With most products, a high quality paint finish is the first thing the consumer notices. A good paint job cannot be achieved without a properly prepared surface. With the Autotac brand, you can be sure to achieve the finest paint preparation equipment in the world. 

Autotac is owned by Oakland Automation and is a patented technology that powers ‘off the shelf’ and custom solutions around the world.

Autotac Products

CLEANWALL OR INBOOTH FEATHER DUSTER

The Feather Duster is offered in two different versions, both the Clean Wall and In-Booth, meaning it can be installed into a new or existing booth enclosure.

Both the Clean Wall and In-Booth versions use a top down configuration. This “off the shell” solution can be further customized to provide a complete turnkey installation for a single machine or an entire booth.

FEATURES:

  • All mechanical equipment located outside booth wall.
  • All flexible exhaust hoses located in columns.
  • Side hoods remain parallel to surface.
  • Patented hood design with even distribution of vacuum.
  • Rotating overhead axis for optimum cleaning.
  • Closed loop electric drives. Optional Servo Control.

 

  • Automatic / manual adjustment of side hood angles.
  • Complete ionization system.
  • GUI standard, choices available.
  • PLC controlled.
  • Turnkey installations.
  • Two year warranty.

FEATURES:

  • Side hoods remain parallel to surface.
  • Patented hood design with even distribution of vacuum.
  • No flexible hoses or gearboxes above job.
  • Rotating overhead axis for cleaning rear surfaces.
  • Closed loop electric drives. Optional Servo Control.

 

FIVE ROLL FEATHER DUSTER

The Standard Autotac Feather Duster uses a top down configuration. Highly flexible, this machine can be customized to fit a variety of special needs.

 

 

  • Automatic / manual adjustment of side hood angles.
  • Complete ionization system.
  • PLC controlled.
  • GUI standard, choices available.
  • Turnkey installations.
  • Two year warranty.


CUSTOMIZED SMALL PARTS APPLICATIONS

The Small Parts Feather Duster is highly flexible and can be customized to fit a wide variety of small parts and products.

This machine removes surface debris and eliminates static charge on parts that could cause paint defects. It uses a rotating feather roll inside a vacuum extraction hood to remove dirt particles out of and off of production parts. Neutralizing electrostatic attraction between the paint surface and dust, the system extracts the contaminates from small parts as they pass on the conveyor and into the paint booth.

FEATURES:

  • Automatic / manual adjustment of side hood angles.
  • Complete ionization system.
  • PLC controlled.

 

 

  • GUI standard, choices available.
  • Turnkey installations.
  • Two year warranty.

FEATURES:

  • Cleanwall design.
  • Two axis articulated top arm, vertical and rotational.
  • Manually adjustable side arms.
  • Fan generated air supply.
  • Adjustable outlet velocity.

 

CLEANWALL FAN-DRIVEN ARTICULATED BLOWOFF

This machine combines a high velocity ionized air supply to reduce the static charge and remove dirt, dust and contaminates from the surface of the job. The horizontal airknive travels vertically to maintain the optimum distance from the surface to be cleaned.

 

  • Ionization system for the removal of static charge.
  • Servo driven optional closed-loop electric drive.
  • PLC controlled, multiple body styles.
  • GUI standard, choices available.

 

CLEAN WALL OR INBOOTH FAN-DRIVEN STATIONARY BLOWOFF

The Fan-driven Stationary Blow-off is offered in two different versions, both the Clean Wall and In-Booth, meaning it can be installed into a new or existing booth enclosure.

This stationary blow-off combines a lower velocity ionized air supply to reduce the static charge and remove dirt, dust and contaminates from the surface of the job. The Fan-driven Stationary Blow-off is generally installed after the Automatic Tack-off (Feather Duster) system.

FEATURES:

  • Cleanwall design.
  • Fan generated air supply.
  • Adjustable outlet velocity.

 

 

 

  • Ionization system for the removal of static charge.
  • Automatic / Manual Controls.

FEATURES:

  • Cleanwall design.
  • Two axis articulated top arm, vertical and rotational.
  • Manually adjustable side arms.
  • Closed-loop electric drive. Optional servo control.

 

COMPRESSED AIR ARTICULATED BLOWOFF

This machine combines ionization with a compressed air supply to reduce the static charge and remove dirt, dust and contaminates from the surface of the job. The horizontal airknive travels vertically to maintain the optimum distance from the surface to be cleaned.

 

 

  • Ionization system for the removal of static charge.
  • PLC Controlled.
  • GUI standard, choices available.
  • Automatic / Manual Controls.

 

COMPRESSED AIR STATIONARY BLOWOFF

This machine combines ionization with a compressed air supply to reduce the static charge and remove dirt, dust and contaminates from the surface of the job. Each individual airknive can be manually adjusted to a fixed position.

 

 

FEATURES:

  • Adjustable outlet velocity.
  • Ionization system for the removal of static charge.

 

  • Manually adjustable arm positions.
  • Automatic / Manual Controls.

 

FANDRIVEN BLOWOFF CONTAINMENT ZONES

This is a complete modular system that blows off the dust and dirt from paint surfaces and recirculates the air through a filtration system. This helps contain contaminants and maintain air balance.

 

 

 

COMPLETE CONTAINMENT ZONES

When used in conjunction with an Autotac blowoff machine, you will have a complete modular system to blowoff the dust and dirt from paint surfaces and recirculate the air through a filtration system. This helps contain contaminants and maintain air balance.